Owner's manual

12
Current output requires the use of purposely designed current input instrumentation. Current output is more suitable for
transmitting over longer distances because current is not lost due to wiring resistance. Additionally, with a low
impedance, a current loop is less likely to pick up noise.
The total loop resistance (resistance of measuring equipment and wiring) must not exceed specification.
Note: The LDX-3A is not loop powered. A power supply must not be used in-line with the current output.
4.0: Installation (continued)
LDX-3A
M-1633/0905
4.6.2: Current Connections
Iout
Vout
0
V
Process Monitor
Current
+
-
Current Monitor