Owner's manual

Section Title Page
4.6.2 Current Connections . . . . . . . . . . . . . . . . . 12
4.7 Using an EMC Cable Gland . . . . . . . . . . 13
5.0 Setting up the Transducer and LDX-3A . . . 14
5.1 Option Links Explained . . . . . . . . . . . . . 15
5.2 Basic Procedure . . . . . . . . . . . . . . . . 16
5.3 Sensitivity and the X2, X4,DIV2 Links . . . . 20
6.0 Half-Bridge Version . . . . . . . . . . . . . . . . 21
7.0 Specifications . . . . . . . . . . . . . . . . 22
7.1 Electrical . . . . . . . . . . . . . . . . . . . . . 22
7.2 Mechanical and Connections . . . . . . . . . 24
7.3 Environmental. . . . . . . . . . . . . . . . 24
7.4 Notes . . . . . . . . . . . . . . . . . . . . . .25
Section Title Page
1.0 Index . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.0 Safety Information . . . . . . . . . . . . . . . . 2
3.0 Introduction . . . . . . . . . . . . . . . . . . . . . 5
3.1 LDX-3A Enhancements . . . . . . . . . . . . 5
4.0 Installation . . . . . . . . .. . . . . . . . . . . . 6
4.1 Mounting . . . . . . . . . . . . . . . . . . . . . 6
4.2 Operational Environment . . . . . . . . . . . . . . 7
4.2.1 Residential, Commercial & Light Industrial
Environments . . . . . 7
4.2.2 Industrial Environments . . . . . . . . . . . . 7
4.3 Electrical Connections . . . . . . . . . . . . . . . 8
4.4 Connecting the Transducer . . . . . . . . . . . . . 9
4.5 Mains Power Supply . . . . . . . . . . . . . . 10
4.6 Connecting the Signal Out . . . . . . . . . 11
4.6.1 Voltage Connections . . . . . . . . . . . . . . . . .11
LDX-3A
1.0: Index
1
M-1633/0905