Owner's manual

The LDX-3A is a development of the original LDX-3A. It is a compact conditioning module powered from an external
power supply unit. Adjustable gain and zero controls are provided for use with the complete range of Omega LVDT and
half-bridge transducers.* The unit is of robust construction, housed in a die cast metal box providing a substantial
degree of mechanical protection.
The LDX-3A uses a universal mains input power supply and provides an output of up to ±10V and ±20mA.
The LDX-3A has the following features.
- Wide gain range, allowing ALL Omega transducers to be connected without the need for attenuation resistors.
- Up to ±10V dc and ±20mA are available for all gain settings.
- Fixed and variable offsets make setting of uni-polar output easier.
- Gain and offset adjustment are fully independent.
- Selectable transducer excitation frequency.
- Selectable transducer load resistances.
- Selection between forward and reverse connection.
- Fully CE compliant.
- Half-bridge transducers can be accommodated with simple plug wiring changes.*
*For half-bridge only variant see section 6.0.
LDX-3A
3.0: Introduction
5
M-1633/0905
3.1: LDX-3A Enhancements