OFI604A 14 place settings
For detailed operating method read the corresponding content on the instruction manual. Switch on the appliance Fill the detergent dispenser Check the rinse aid level Load the baskets Select a programme Running the dishwasher Open the door,press the On/Off button to switch on the appliance . With each wash cycle. Compartment For programmes with pre-wash only. (Follow the user instructions!) Electric indicator on control panel (if provided). Scrape off any large amount of leftover food.
Dear Customer, This appliance is in tended to be used in household and similar app lications such as: -staff kitch en areas in shop s, offices and other workin g en viron ments; -farm hous es; -by clients in hotels, motels and othe r residential type environments; -bed and breakfast type environments. Please carefully read this manual before using the dishwasher, it wil l help you to use and maintain the dishwasher properly. Keep it as a referen ce in the later da ys.
CONTENTS Control Panel................................................................................................................................... ..... 2 Dishwasher Features.......................................................................................................................... ...2 A、F ill the Rinse Aid Dispenser............. ..... ...................................................................................... .... ..3 B、Function of Deterg ent ........ ....................
When using your dishwasher, follow the precautions listed below: This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of an electric shock by providing a path of least resistance of electric current. This appliance is equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.
To get the best performance from your dishwasher, read all operating instructions before using it for the first time. 3h 6h 9h 1.Power indicator: To show when the power on. 5.Program indicators: To show which program you have chosen; 2.Rins e a id warning light:To sh ow dispenser need to be re filled Rinse aid. 6.Option Button: To select Half load and Extra dry functions, these fun ctions can only be used with programme s Intensive,Heavy, Normal, Glass and 1 Hour. 3.
Before using your dishwas her for the first time: A. Fill th e rinse a id dispenser B. Fill in detergent Rinse Aid Dispenser The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser.
Adjusting Rinse Aid Dispenser The rinse aid dispenser has six or four settings. Always start with the dispenser set on "4". If spots and poor drying are a pro ble m, increase the amount of rinse aid dispensed by removing the dispe nser lid and rotating the dial to "5". If the dishes still are not drying properly or are showing spots, adjust the dial to the next higher lever until your dishes are spot-free. The recommended setting is "4". (Factory value is "4".
Amount of Detergent to Use If th e lid is close d: press rele ase button. The lid will spring ope n. Always add the dete rgent just before starting each wash cycle. Only use branded detergent aid for d ishwash er. Dishwasher detergent is corrosive! Take care to keep it ou t of reach of c hildren. Proper Use of De terg ent Use only deterge nt specifically made for the use in dishwashers. Keep your detergent fresh and dry. Don't put powdered d etergent into the dispenser until you're ready to wash dishes.
Consider buying utensils which are identified as dishwasher-proof. Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further information from the detergent manufacturers. For particular items, select a program with as low a temperature as possible. To prevent damage, do not take gla ss a nd c utlery out of the dishwasher immediately after the programme h as ended.
The u pper basket is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cups and saucers, as well as plates, small bowls and shallow pans (as long as they are not too dirty). Position the dishe s an d co okware so that they will not get moved by the spray of wate r. We suggest that you place large items and the most difficult to clea n items into the lower basket: such as pots, pans, lids, serving dishes and bowls, as shown in the figure below.
Cutlery should be placed in the cutlery rack separately fro m each other in the appropriate positions, and do make sure the utensils do n ot nest together, this may cause bad performance. Fo r a top quality cle aning, p lace the silverware in the basket making sure tha t: They do not nest together. Silverware is placed with the male face up. Long ute nsils in the middle. Max. Dishes Max. Dishes Top basket Bottom basket Lower Position max.Φ 19cm 25cm Upper Position max.
( ) Means: need to fill rinse into the Rinse-Aid Dispenser. Pre-wash(50℃) Wash (65 ℃) casserole dishes and dishes Rinse Rinse that have been sitting with Rinse(65℃) dried food on them for a Drying while. Pre-wash(45 ℃) Wash (55 ℃) For heavily soiled loa ds, such as pots, plates, glasses Rinse Rinse (60 ℃) and lightly soiled pans. Drying For the heaviest soiled Intensive loads, such as pots, pans, Heavy Normal For normally soiled loads, such as pots , plates,glasses and lightly soiled pans.
Premise: A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the detergent may have already been released, and the appliance may have already drained the wash wa ter. If this is the case, the detergent dispenser must be refilled (see the section entitled " Loading the Detergent " ).
The filter prevents larger remnants of food or other objects from getting inside the pump. The residues may block the filter, in this case they must be removed. The filter system consists of a coarse filter,a flat (Main filter) And a microfilter(Fine filter). Main filter 2 1 Fo od and soil particles trap ped in this filter are pulverized by a specia l jet on the lower spray arm and washed down to drain.
Remarks: - Inspect the filters for blo cking a fter e very time the dishwa sher has been used. - By unscrewing the coarse filter, you can remove the filter system. Re move any foo d remna nts and clean the filters under running water. The entire filter assembly should be cleaned once a week. Cleaning the Filter To clean the coarse filter and the fine filter, use a c leaning b rush.
After Every Wash When not in Use for a LongTime After every wash, turn off the water supply to the appliance and leave the door slightly open so that moisture and odours are not trapped inside. It is recommend that you run a was h cy cle with the dishwasher empty an d the n remove the plug from the socket, turn off the wa ter supply and leave the door of the appliance slightly open. This will help the d oor seals to last longer and prevent odours from forming within the appliance.
Please carefully read the installation instruction. Illustrations of cabinet dimen sions and installa tion position of the dishwasher 1 2 Preparations should b e made befo re moving the dishwasher to the installation place. Choose a place near the sink to facilita te the installation of inlet and drain hoses (see figure 1). If dishwa sher is installed at the corner o f the cabinet, there should be some sp ace (illustrated in figure 2) when the door is opened.
2 Install the hook on the aesthet ic wooden panel and put the hook into the slot of the outer door of dishwasher(see figure 4a). Af ter positioning of the panel , fix the panel onto the outer door by screws and bolts(See figure 4b) . 【Figure4a】 Installation of aesthetic panel 【Figure4b】 Installation of aesthetic wooden panel 1 . take away the four short screws 2 .
● Tension adjustment of the door spring The door springs are set at the factory to the proper tension for the outer door. If aesthetic wooden panel are installed, you will have to adjust the door spring tension. Rotate the adjusting screw to drive the adjustor to strain or relax the steel cable (see figure 5). Door spring tension is correct when the door remains horizontal in the fully opened position,yet rises to a close with the slight lift of a finger.
● Dishwasher installation steps 1 Install the furniture door to the outer door of the dishwasher using the brackets provided. Refer to the template for positioning of the brackets. 2 Adjust the tension of the door springs by using an Allen key turning in a clockwise motion to tighten the left and right door springs. Failure to do this could cause damage to your dishwasher (Illustration 2) . 3 Connect the inlet hose to the cold water supply . 4 Connect the drain hose. Refer to diagram .
Dishwasher must be level for proper dish rack operation and wash performance. 1 Place a spirit level on door and rack track inside the tub as shown to check that the dishwasher is level. 2 level the dishwasher by adjusting the three levelling legs individually. 3 When level the dishwasher, please pay attention not to let the dishwasher tip over. 【Figure 8】 Illustration of feet adjustment Chec k level Front to Back NOTE: The maximum adjustment height of the feet is 50 mm.
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened tightly in place. If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear. This precaution is needed to avoid the risk of the water inlet to be blocked and damage the appliance. please close the hydrant after using. Positioning the Appliance Position the appliance in the desired location.
Fuse blown, or the home Replace fuse or reset circuit breaker. Remove any other circuit breaker has been appliances sharing the same circuit with the dishwasher triggered Power supply is not turned on Make sure the dishwasher is turned on and the door is closed securely. Make sure the power cord is properly plugged into the wall socket. Water pressure is low Check that the water supply is connected properly and the water is turned on. Door of dishwasher not properly closed.
The dishes were not loaded correctly. See notes in " Loading the Dishwasher Baskets ". The programme was not powerful enough. Select a more intensive programme. See" Wash Cycle Table ". Not enough detergent was dispensed. Use more detergent, or change your detergent. Items are blocking the path of spray arms. Rearrange the items so that the spray can rotate freely. The filter combination in the base of wash cabinet is not clean or is not correctly fitted.
If overflow occurs, turn off the main water supply before calling a service. If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher. Height : Width : Depth : Water pressure: Power supply: Capacity: 815mm 598 mm 550mm ( with the door closed ) 0.04-1.