Product Manual

12
Note: Pressing
" STOP/CLEAR " will stop any cooking process or clear any function that
is being set. The button used to open the door is below the control panel.
1.Clock Setting
When the microwave oven is Powered On, the oven will display "0:00" and the
buzzer will ring once.
1) Press " KITCHEN TIMER/CLOCK " once. "00:00" displays.
2) Turn " " to adjust the hour figures, the input time should be within 0--23(24-hour).
3) Press " KITCHEN TIMER/CLOCK ", the minute figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press
" KITCHEN TIMER/CLOCK "
to finish clock setting. ":" will flash (time shown).
Note: 1) If the clock is not set, the appliance will not function when powered.
2) During the process of clock setting, if you press " STOP/CLEAR ", the oven
will go back to the previous status automatically.
2. Microwave Cooking
Press " Micro/Grill/Combi " the LED will display "P100".Press " Micro/Grill/Combi “or
turn " "to choose the power you want, and "P100", "P80" "P50", "P30" or "P10” will
be displayed for each extra press. Then press "START/+30SEC./CONFIRM " to
confirm, and turn " " to set cooking time from 0:05 to 95:00. Press "
START/+30SEC./CONFIRM " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven with the following steps.
1) Press
" Micro/Grill/Combi "
once, the screen display "P100".
2) Press
" Micro/Grill/Combi "
once again or turn" " to choose 80% power.
3) Press "Start/+30Sec./Confirm " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " Start/+30Sec./Confirm" to start cooking.
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes