User Manual

APPLIANCE DETAILS
Voltage:
220-240V
Frequency:
50Hz
Lamp Max:
2x28W E14 Halogen
Rated Input Power:
256W
GENERAL INFORMATION
Before installing and operating the range hood, carefully read the following important
information regarding installation safety and maintenance. Keep this information booklet
accessible for further consultations.
The appliance has been designed to exhaust cooking fumes through the hole in the top of the
range hood only. The fumes can be exhausted externally using optional ducting, or it may be
used to re-circulate the air back into the room (charcoal filters are required for re-circulating
installation).
Before installation, please ensure that the following have been supplied and that the tools
listed below are readily available.
WHAT IS SUPPLIED
Range h
ood (including one way valve for ducting) x 1
Installation kit (long screws x 4, short screws x 2, long bolts x 6, short bolts x 2, washers x 6,
plastic plugs x 4, small brackets x 2, long bracket x 1) x 1
Instruction booklet x 1
Note: Flexible tubing and charcoal filters are NOT supplied with the unit.
WHAT MAY BE NEEDED FOR INSTALLATION
Electric Drill
Duct Tape
Tape Measure
Jig Saw
Spirit Level
Ladder
Screwdrivers
Torch (If natural lighting is minimal)
DO NOT
OPERATE THIS APPLIANCE BEFORE READING THE
INSTRUCTION BOOKLET