OSI604 14 place settings
Thank you for introducing our family to yours At Omega, we understand that cooking, cleaning and washing may not be your favourite things in the world. That's why we created a range of no-nonsense, reliable products that always get the job done for you. With the features you need and nothing you don't. What's more, they're made to fit perfectly into your home life and your wallet. We aim to simplify any further appliance purchases.
For detailed operating method read the corresponding content on the instruction manual. Switch on the appliance Open the door, p ress the On/Off button to switch on the appliance. C For each wash cycle. A B Fill the detergent dispenser For programs with pre-wash only. (Follow the user instructions) Check the rinse aid level Load the baskets Select a program Running the dishwasher Electric indicator on control panel (if provided). Scrape off any large food particles.
When using your dishwasher, follow the precautions listed below: This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of an electric shock by providing a path of least resistance of electric current. This appliance is equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.
To get the best performance from your dishwasher, read all operating instructions before using it for the first time. 1.On/Off Button: To turn on/off the power supply. 2.Delay Button : Press the button to set a delay time. 3. Function Button : Press the button to select appropriate Function. 4. Display screen : Show which program and option you have chose d . The indicator icon shows as follow. Intensive Heavy Normal Glass 90Min Rapid Rinse detergent need to be refilled.
Before using your dishwasher for the first time: A. Fill the rinse aid dispenser B. Fill in detergent A. Filling the Rinse Aid Dispenser Rinse Aid Dispenser The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is located inside ,on the door and next to the detergent dispenser.
Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming during the next wash. Don't forget to replace the cap before you close dishwasher door. Adjusting Rinse Aid Dispenser The rinse aid dispenser has six or four settings. Always start with the dispenser set on "4". If spots and poor drying are a problem, increase the amount of rinse aid dispensed by removing the dispenser lid and rotating the dial to "5".
Adding detergent to dispenser Fill in Detergent A B Fill the detergent dispenser with detergent. The marking indicates the dosing levels , as illustrated on the right: A B The place of main wash cycle detergent placed. The place of pre-wash cycle detergent placed. Please observe the manufacturers dosing and storage Recommendations as stated on the detergent packaging. Close the lid and press until it locks in place.
Consider buying utensils which are identified as dishwasher-proof. Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further information from the detergent manufacturers. For particular items, select a program with as low temperature as possible. To prevent damage, do not take glass and cutlery out of the dishwasher immediately after the program has ended. Not suitable for use Limited suitability Cutlery with wooden, horn china or mother-of-pearl handles.
The Method Loading Normal Dishware Loading the Lower Basket Loading the Upper Basket The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cups and saucers, as well as plates, small bowls and shallow pans (as long as they are not too dirty). Position the dishes and cookware so that they will not get moved by the spray of water.
Cutlery tray could be have 5 positions: Mode 1 Position one: lift the left basket up, both left and right baskets are slanting. Mode 2 Position two: adjust the left basket to lower position, left basket is flat and right basket is slanting. Mode 3 Position three: lift the right basket up, both left and right baskets are flat. Mode 4 Position Four: Move the right basket from right to left, two basket are overlapping.
Wash Cycle Table ( ) Means: need to fill rinse aid into the Rinse-Aid Dispenser. 。 ) For heaviest soiled crockery, Pre-wash(50 。 C Wash (60 C) pans、dishes etc with dried Rinse Rinse 。 on soiling. Rinse(65 C) Intensive and normally soiled pots、 5/27.5g (Or All in1) 170 1.5 17.5 Drying 。 Heavy Normal (*AS/NZS 2007.1) Glass For heavily soiled loads, such as pots, plates, glasses and lightly soiled pans. P re-wash(45 C) Wash (55。 C) Rinse 。 Rinse (65 C) Drying 5/27.5g (Or All in1) 160 1.3 13.
Premise: A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the detergent may have already been released, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled (see the section entitled " Loading the Detergent " ). 2 Press the Start/Pause button to stop the machine .
The filter prevents larger remnants of food or other objects from getting inside the pum. The residues may block the filter, in this case they must be removed. The filter system consists of a coarse filter, a flat (Main filter) and a microfilter(Fine filter). Main filter 2 1 Food and soil particles trapped in this filter are pulverized by a special jet on the lower spray arm and washed down to drain.
Notes: - Inspect the filters for blocking after every time the dishwasher has been used. - By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants and clean the filters under running water. The entire filter assembly should be cleaned once a week. Cleaning the Filter To clean the coarse filter and the fine filter, use a cleaning brush.
After Every Wash When not in Use for a LongTime After every wash, turn off the water supply to the appliance and leave the door slightly open so that moisture and odours are not trapped inside. It is recommend that you run a wash cycle with the dishwasher empty and then remove the plug from the socket, turn off the water supply and leave the door of the appliance slightly open. This will help the door seals to last longer and prevent odours from forming within the appliance.
Please carefully read the installation instruction. Illustrations of cabinet dimensions and installation position of the dishwasher 1 2 Preparations should be made before moving the dishwasher to the installation place. Choose a place near the sink to facilitate the installation of inlet and drain hoses (see figure 1). If dishwasher is installed at the corner of the cabinet, there should be some space (illustrated in figure 2) when the door is opened.
● Tension adjustment of the door spring The door springs are set at the factory to the proper tension for the outer door. If aesthetic wooden panel are installed, you will have to adjust the door spring tension. Rotate the adjusting screw to drive the adjustor to strain or relax the steel cable (see figure 5). Door spring tension is correct when the door remains horizontal in the fully opened position ? yet rises to a close with the slight lift of a finger.
● Dishwasher installation steps 1 Install the furniture door to the outer door of the dishwasher using the brackets provided. Refer to the template for positioning of the brackets. 2 Adjust the tension of the door springs by using an Allen key turning in a clockwise motion to tighten the left and right door springs. Failure to do this could cause damage to your dishwasher (Illustration 2) . 3 Connect the inlet hose to the cold water supply . 4 Connect the drain hose. Refer to diagram .
Dishwasher must be level for proper dish rack operation and wash performance. 1 Place a spirit level on door and rack track inside the tub as shown to check that the dishwasher is level. 2 level the dishwasher by adjusting the three levelling legs individually. 3 When level the dishwasher, please pay attention not to let the dishwasher tip over. 【Figure 8】 Illustration of feet adjustment Check level Front to Back NOTE: The maximum adjustment height of the feet is 50 mm.
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened tightly in place. If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear. This precaution is needed to avoid the risk of the water inlet to be blocked and damage the appliance. Please close the hydrant after using. Positioning the Appliance Position the appliance in the desired location.
Before Calling for Service Technical problems Fuse blown, or the circuit breaker acted Replace fuse or reset circuit breaker. Remove any other appliances sharing the same circuit with the dishwasher Power supply is not turned on Make sure the dishwasher is turned on and the door is closed securely. Make sure the power cord is properly plugged into the wall socket. Error code:E1; Water pressure is low Check that the water supply is connected properly and the water is turned on.
Unsatis -factory washing result Unsatis -factory drying result The dishes were not loaded correctly. See notes in " Loading the Dishwasher Baskets ". The program was not powerful enough. Select a more intensive programme. See" Wash Cycle Table ". Not enough detergent was dispensed. Use more detergent, or change your detergent. Items are blocking the path of spray arms. Rearrange the items so that the sprayer can rotate freely. The filter combination is not clean or is not correctly fitted.
Technical Information Height : Width : Depth : 815mm 598 mm 570mm (with the door closed) Water pressure: Power supply: Capacity: 0.04-1.