Engineering Inc. User's Guide Remote Control

Figure 2

Keypad

Table 2 Key Functions

No. Name Description

1 Function Keys These keys are used in various ways, primarily to

configure the calibrator

2 ON/OFF Key This key is used to turn the calibrator on and off

3 ZERO Key This key is used to zero pressure measurements

4 Backlight Key This key is used to turn the backlight on and off

2.1 Calibrator Display

The Calibrator Display consists of two regions: The menu bar

(located along the bottom of the screen) is used to access a menu

system. The main display (the rest) consists of up to three process

measurement sub-regions. These sub-regions will henceforth be

referred to as the UPPER, MIDDLE and LOWER displays. Figure 3

shows the location of the different display fields while table 3

describes them.