Programmable Recorder User's Guide

6-11
Setup Operations for Convenient Functions (Setting Mode)
6
6.11 Setting the Brightness of the Display and
Internal Light
This section explains the details of setting the brightness of the display and the internal
light.
Procedure
1. Hold down the
MENU
key for 3 seconds to enter Setting mode.
2. Press the
key or SHIFT + key to select Aux and then press the
key.
3. Press the key or SHIFT + key to select Brightness and then press the
key.
4. Set each item and press the key.
Use the key or SHIFT + key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up
to then are cancelled, and the display returns to a higher level menu.
5. When the Setting complete screen appears, do either of the following:
To correct the setting, press the
key.
If you are done, press the ESC key.
6. Hold down the
MENU
key for 3 seconds to return to Operation mode.
Select the brightness of the display.
Select the brightness of the internal
light.
The new setting takes effect.
ESC/?
Set=Aux
Aux=Brightness
Display=4
Light=Off
Brightness
Setting complete
Explanation
Display Brightness
The brightness can be set to an integer between 1 and 8. The darkest setting is 1; the
brightest setting is 8.
Internal Light Brightness
The brightness of the internal light can be set to an integer between 1 and 4. The
darkest setting is 1; the brightest setting is 4. Select Off to turn Off the internal light.