Programmable Recorder User's Guide

9-17
Operations Related to the Computation Function (/M1 Option)
9
9.9 Turning Trend Recording (Dot Model) and
Periodic Printout ON/OFF for Each Channel
This section explains the details of setting the trend recording and periodic printout for
each computation channel.
The following settings can be entered for each channel on the dot model.
• Turn trend recording ON/OFF.
• Turn the printing of computed values ON/OFF during periodic printout.
The following setting can be entered for each channel on the pen model.
• Turn the printing of computed values ON/OFF during periodic printout.
Procedure
1. Hold down the
MENU
key for 3 seconds to enter Setting mode.
2. Press the key or SHIFT + key to select Math and then press the
key.
3. Press the key or SHIFT + key to select Aux and then press the
key.
4. Press the
key or SHIFT + key to select Print out and then press the
key.
5. Set each item and press the key.
Use the
key or SHIFT + key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up
to then are cancelled, and the display returns to a higher level menu.
6. When the Setting complete screen appears, do either of the following:
Press the
key to set other channels.
If you are done, press the ESC key.
7. Hold down the
MENU
key for 3 seconds to return to Operation mode.
Set the channel range.
The new setting takes effect.
ESC/?
Turn trend recording On/Off
(dot model).
Select whether to print the computed
values during periodic printout and
printout using the TLOG timer (On/Off).
First channel
Last channel
0A-0A Channel
Setting complete
Set=Math
Math=Aux
Aux=Print out
Trend=On
Periodic=On
CH=0A-0A