Products, Inc Recording Equipment User Manual

6 - 17

6. SET MODE

6.7

Adjusting the Trend Recording Format (TREND, Dot-printing

model)

This recorder prints in FIX or AUTO mode.

In FIX mode, dot printing is performed with a constant interval regardless of the chart

speed (approx. 20 sec).

AUTO mode is provided to prevent the chart from being damaged during repetitive dot

printing. This mode is useful for low chart speeds. The chart is protected from damage

because the printout timing changes with the chart speed (approx. 20 to 90 sec).

Single printout

(0.5mm dia.)

Repetitive dot

printing

FIX AUTO

The initial value is ‘AUTO’. To set the trend recording mode, proceed as follows:

Key Operation Indication Discription

Press the [DISP] key for three seconds to enter the SET mode.

Select the [ ] display using the [ ] key, and press

the [ENT] key.

Specify AUTO or FIX using the [ ] key. Then press the

[ENT] key.

[ ] is displayed and the setting is completed. Press the

[DISP] key for three seconds to return to the OPERATION

mode.

NOTE If you press the [ESC] key in the middle of setting, the indication returns to the

[ ] and already set data will be aborted.

6.7 Adjusting the Trend Recording Format

(TREND, Dot-printing model)

DISP

ESC

3 sec

DISP

ESC

CH UP