Products, Inc Recording Equipment User Manual

1 - 1
1. BEFORE INSTALLATION
Chapter 1 BEFORE INSTALLATION
This chapter describes the necessary preparations before handling the recorder; read
them for safe handling.
1.1 Handling Precautions
The recorder contains many plastic parts. To clean, use a soft, dry cloth. Do not use
chemicals such as benzene or thinner, since these may cause discoloration or damage.
Do not bring any objects charged with static electricity near the signal terminals. This
might cause malfunction.
Do not allow any volatile substances to the front glass or key panel. Do not allow
rubber or vinyl to remain in contact with the recorder for long periods.
Whenever the recorder is not used, turn the power switch off.
Turn the recorder power switch off as soon as any symptoms of malfunction such as
unusual sound, smell, or smoke yield from the recorder. Also turn the main power
switch off.
If a malfunction occurs, contact your sales representative or nearest service center.
1.1 Handling Precautions