User's Manual

Getting Started
12
• Settings - Results record, clock and general system settings
• Language - Allows the user to configure handset in English, French or Spanish
Gas Analyzer
To access Emission Menu press the button with the pointing at Gas Analyzer.
Follow the instructions and press the button.
The handset will display ‘Analyzer SetUp - Please Wait’ and a progress bar. On
completion the progress bar will be replaced briefly by ‘Passed’.
During this time the analyzer is initializing settings ready to conduct emissions testing.
Once completed the display screen will change back to the ‘Main Menu’.
The handset has an automatic power saving facility, if no action is taken after one
minute the display backlight powers down. Pressing any button will turn the backlight
back on. If the handset does not detect a button press for more than 15 minutes it will
assume that the OmiScan Gas is not in use and the Base Station and the Handset
will automatically power down.
NOTE: The automatic shutdown feature is disabled during ‘Live Reading’ test.
MAIN MENU
Gas Analyzer
PC/USB Mode
Settings
Lang, Idioma

REMOVE THE PROBE
Ensure the exhaust
probe is in clean
air
-OK

ANALYZER SETUP
Please wait. . . . .