User's Manual

Getting Started
41
View Thresholds
When you select ‘View Thresholds’ the screen will display the threshold levels of the
various gases for all of the simulated test procedures, TSI Default, Custom TSI 1,
Custom TSI 2, ASM Default, Custom ASM 1, Custom ASM 2 and CAT. Press to
toggle through thresholds one at a time.
Wireless Setup
When you select ‘Wireless Setup’ the screen will display ‘WIRELESS SETUP’ with
item:
• Base Station
In ‘Base Station’ the screen displays ‘Set base station address’, e.g.
‘008098E5CCBC’ (this address is preset on build and would not normally require
changing). The address is an alphanumerical address and ensures that the handset
talks only to that Bluetooth
®
Wireless Technology address. The Bluetooth
®
Wireless
Technology address should be written in the Quick Guide in the area provided. Use
the and/or on the handset to set each address character; when correct, press
the button to move to the next character. On completion of entering all of the
characters, press to save, the bottom line (
-OK X-Cancel -Move) will flash until
is pressed again to confirm the address and exit. Press to cancel change and
exit.
CAT DEFAULT
CO<0.3% HC<200
O2<1.00% CO2>14.0%
NOx<100
-OK, X-Cancel
WIRELESS SETUP
Base Station

WIRELESS SETUP
Set base station
address
008098E5CCBC
__________________________
-OK X-Cancel -Move
