User's Manual

Getting Started
44
Press to proceed and the handset will prompt you to save the results and to
remove the probe from the exhaust.
Note: Any saved data will state ‘Some Data Lost’ due to loss in Communications when
the base station is powered down. Likewise, if the data is analyzed on the PC
software, any data lost will be clearly indicated and all the gas readings for that part
of the test will be recorded as zero. After data has been either saved or discarded, the
handset will automatically shut down.
Out of Range
The OmiScan Gas should function normally with the handset up to at least 10 metres
(30 feet) away from the base station. However, if the handset is taken out of range
the display communication icon will disappear and the following text will be displayed:
If the handset is taken back within range within a few seconds, the handset will revert
to the previous screen shown before it was taken out of range.
At the end of the test the handset will give a warning ‘Some Data Lost’ giving the
option to save the test.
Note: Any saved data will state ‘Some Data Lost’ due to loss in communications when
the base station is powered down. Likewise, if the data is analyzed on the PC
software, any data lost will be clearly indicated and all the gas readings for that part
of the test will be recorded as zero.
WARNING
Base station out of
range
X-Abort
X
LIVE READINGS
Some data was lost
during the test
due to signal loss.
-OK
