Cut Sheet

BUILDING WIRE, THHN/THWN-2 & T90, 600V

THHN - THWN-2

90°C - 600 Volt

Building Wire

*Product images are for illustrative purposes

only and may differ from the actual product.

Category Conductor Description:

Solid or stranded annealed copper

Category Insulation Description:

Extruded layer of heat, moisture, and

flame resistant Polyvinyl Chloride

(PVC) with an extrusion of high heat

and light stabilized nylon

Applications:

May be installed in conduit, duct, or other recognized raceways

in wet or dry locations

Small diameter of the wire permits additional circuits or larger

conductors without exceeding maximum fill limitations

Tray cable rated and sunlight-resistant available upon request,

sizes 1/0 AWG and larger

Standards:

UL 83 - THHN/THWN

UL 1063 - Machine Tool Wire

UL 758 - Appliance Wiring Material

VW-48

CSA C22.2 No.75

CSA FT-1

PAGE 1
BUILDING WIRE, THHN/THWN-2 & T90, 600V THHN - THWN-2 90°C - 600 Volt Building Wire *Product images are for illustrative purposes only and may differ from the actual product.
PAGE 2
PART NUMBER TABLE Part# Gauge Stranding Insulation Thickness Jacket Thickness Outside Diameter Inches Material Weight (Lbs./M') Material Weight (KG/KM) M514SO-01 14 Solid 0.015 0.004 0.102 16 23 M514ST-01 14 19 0.015 0.004 0.112 16 23 M512SO-01 12 Solid 0.015 0.004 0.119 24 35 M512ST-01 12 19 0.015 0.004 0.131 24 35 M510SO-01 10 Solid 0.02 0.004 0.15 37 55 M510ST-01 10 19 0.02 0.004 0.16 37 55 M508ST-01 8 19 0.03 0.005 0.