Cut Sheet

Category Conductor Description:

•

Solid or Stranded annealed copper

Category Insulation Description:

•

Extruded layer of heat, Moisture, and flame resistant PVC with

an extrusion of high heat and light stabilized Nylon

Applications:

•

may be installed in conduit, duct, or other Recognized

raceways in wet or dry locations

•

Small diameter of the Wire Permits additional Circuits or

larger Conductors without exceeding maximum fill limitations

Standards:

•

UL 66 – TFFN/TFN

•

UL 1063 – Machine Tool Wire

•

UL 758 – AWM Style 1320

Building Wire

TFFN – TFN, 90°C – 600 Volt

TFFN - TFN

90°C - 600 Volt

*Product images are for illustrative purposes

only and may differ from the actual product.

PAGE 1
Building Wire TFFN – TFN, 90°C – 600 Volt TFFN - TFN 90°C - 600 Volt *Product images are for illustrative purposes only and may differ from the actual product.
PAGE 2
Part Number Table Part# Gauge Stranding Insulation Thickness Jacket Thickness Outside Diameter Inches Material Weight (Lbs./M') M518SO-01 18 Solid .015'' .004'' .078'' 7.5 M518SO-02 18 Solid .015'' .004'' .078'' 7.5 M518SO-03 18 Solid .015'' .004'' .078'' 7.5 M518SO-04 18 Solid .015'' .004'' .078'' 7.5 M518SO-05 18 Solid .015'' .004'' .078'' 7.5 M518SO-06 18 Solid .015'' .004'' .078'' 7.5 M518SO-07 18 Solid .015'' .004'' .078'' 7.
PAGE 3
M516SO-12 16 Solid 0.015 0.004 0.089 10.5 M516ST-01 16 26 .015'' .004'' .104'' 11 M516ST-02 16 26 .015'' .004'' .104'' 11 M516ST-03 16 26 .015'' .004'' .104'' 11 M516ST-04 16 26 .015'' .004'' .104'' 11 M516ST-05 16 26 .015'' .004'' .104'' 11 M516ST-06 16 26 .015'' .004'' .104'' 11 M516ST-07 16 26 .015'' .004'' .104'' 11 M516ST-08 16 26 .015'' .004'' .104'' 11 M516ST-09 16 26 .015'' .004'' .104'' 11 M516ST-10 16 26 .015'' .004'' .