User's Guide

DO007269-02 Sense Shield User Guide

1.1. Activating the Sense Shield

Before using the Sense Shield you must activate and configure it for your Quuppa

Intelligent Locating System.

1. Press the button for 1 second to wake the Sense Shield from storage state.

2. Within 30 seconds, send a configuration command to the Sense Shield from

the Quuppa Site Planner (QSP) and add the tag to the project. For details,

see instructions on Quuppa tag configuration from the Quuppa Customer

Portal (QCP).

1.2. Sense Shield 2D barcode

There is a 2D barcode located on the underside of the Sense Shield which contains

the tags ID number. The 2D barcode can be scanned with either a separate 2D

barcode reader or a suitable mobile phone app.

1.3. Sense Shield NFC Configurable Settings

Sense Shield settings can be configured via NFC. Omni-ID provides software that

works with ST Microelectronics M24LR Discovery NFC PCB tool. For further

information refer to Omni-ID ‘Sense Config PC App User Guide’.

The following are the configurable parameters:

• Buzzer Volume

o Low, Medium, High