User's Guide

DO007269-02 Sense Shield User Guide

2. Product IO Settings

The Sense Shield is equipped with a bi-colour LED, buzzer and push button for

alerts. The following table details the IO configuration:

Function

Output 1

Green LED

Output 2

Red LED

Output 3

Buzzer

Input: Button 2

Button Push

The button press is reported back to Quuppa Positioning Engine (QPE) as ‘Button 2’.

The Sense Shield tag enters alarm state when it receives Output 3 activation from

Quuppa Positioning Engine (QPE) or 3

party application with Quuppa API.

IO settings for Output 3 can be sent via a Quuppa temporary command with

following the states:

• Always Off (turns off alarm state)

• Always On (buzzer profile: 1sec off and on, 0.5sec cycle)

• Blink Slow (buzzer profile: 3sec off and on, 1sec cycle)

• Blink Fast (buzzer profile: 2sec off and on, 1sec cycle)

IMPORTANT Blinking the LED draws a relatively large amount of power. To

conserve battery power, only blink the LED when necessary.

When Output 3 command is activated the following details the function of the Sense

Shield tag:

State

Function

Button

On, blink slow

or fast

Silence the buzzer, cancels temporary command

and sends button 2 high to QPE

Buzzer

On, blink slow

or fast

Sound alarm at configured volume, three volume

states (user configurable via PC NFC tool)

Buzzer

Off

Buzzer off