Operation Manual
www.omni-tness.eu
12
COMPUTER FUNCTIONS AND USE
Note:
The device has a generator system. The rechargeable bat-
teries may be totally discharged after an extended period
of disuse or following transportation. Because of this, the
computer may fail to start even if connected to the mains. In
this case, please wait for a couple of seconds.
After connecting the device to the mains power, all indicators
on the display light for approx. 2 seconds. The computer then
enters the main screen.
1. Now start the computer and start to push the pedals.
2. Enter your personal data. You can store up to four dier-
ent sets of user data. You must enter the following data:
sex, age, height, weight
3. The computer has an automatic on/o function. If the
computer does not receive a signal for more than 90
seconds, it switches o.
4. If wires are not correctly connected, the display shows
"E1" and a loud buzzer sounds. Please unplug the power
adapter and recheck all the wiring connections (see also
Troubleshooting, Special Notes).
FUNCTIONS
Starting or ending exercise programs
"Fitness grade" between 1- 6 after complet-
ing training. Press the button; then press the
balls of your hands against the hand pulse
sensors for 60 sec. You will see your tness
grade F1 - Very good - F6 - very poor
Starting body fat measurement
2 functions:
1. Before training: Toggle between the pre-
sets.
2. During training: Adjust the
resistance. Press these keys to set your train-
ing presets in ascending order.
Pressing once takes you back. Press for 2
sec.: resets all data.
Conrm the entry. Display change.
OMB2010 Tagma_Instructions manual 2011_GB.indd 12 23.01.2012 17:21:17