user manual

Audio I/O Level Display
Either input or output levels can be displayed. The highest LED illuminated indicates digital sample-accurate peak
signal levels. The meters are calibrated in decibels below full scale digital (0 dBFS) in 2dB steps. 0 dBFS is the
absolute maximum level in the digital domain. Levels from –34 dBFS to –14 dBFS are displayed in blue, levels
from –12 to –2 dBFS are displayed in yellow and 0 dBFS (the clipping point) is displayed in red.
Audio I/O Level Display
Processing Meter Display
In “Meter Display” Mode the vertical bargraphs show all of the processing activity of the AGC and Limiter sections
within the OmniaONE. If the menu is currently displayed on the OmniaONE’s LCD screen, press and hold the jog-
wheel for two seconds and the processing meter display should appear as shown below.
To return to the menu display mode simply click the jog wheel once. (See “Using the Jog Wheel” on the next Page)
Notes: For any meter except the Sensus® and Final Limiter, a change from a solid bar to a checkerboard pattern
indicates a “gated” condition in that band.
The wideband AGC and four-band AGCs will recover to a resting gain setting which coincides with the
RTZ (Return To Zero) levels set for each band.
Processing Meter Display
AGC Meters Limiter Meters
W…… Wide Band L….. Low Band
L……. Low Band M…. Mid Band
M…… Mid Band P….. Presence Band
P…… Presence Band H….. High Band
H…… High Band S……Sensus®
F……Final Limiter
OmniaONE Multicast - Use and Operation Manual – Version 0.90
24