Specifications

■ Will fit 2
1
⁄8” bore.
■ For commercial and residential use.
For commercial use, please
specify at time of order.
■ 2
3
⁄8” and 2
3
⁄4” backsets available.
■ Supplied for 2
3
⁄8” backset and 1
3
⁄8”
door thickness unless
otherwise specified.
■ All lever latchsets are ADA
approved.
Concealed Screw Roses:
Modern
2
9
⁄
16” dia. x
7
⁄
16” proj.
Traditional
2
5
⁄
8” dia. x
1
⁄
2” proj.
Beaded
2
5
⁄
8” dia. x
1
⁄
2” proj.
Roped
2
5
⁄
8” dia. x
1
⁄
2” proj.
Reed & Ribbon
2
5
⁄
8” dia. x
1
⁄
2” proj.
Ornate
2
5
⁄
8” dia. x
1
⁄
2” proj.
Thru-bolted roses have been specifically
designed for use with the knobs and levers
with which they are shown. Each set consists
of solid brass knobs or levers, concealed
screw thru-bolted roses, latch, spindle and
all necessary mounting screws, installation
template and instructions.
About our Tubular Latch
■ Patented worldwide.
■ Star shaped hubs for knobs and
square shaped hubs for levers.
■ All dimensions are standard to fit
existing bores for replacement
installations.
■ Tough, non-rusting materials used
throughout. Face covers and strikes
are solid brass. No. 013 “T” strike
supplied as a standard or No. 014
“Full Lip” strike as an option.
Specify when ordering.
■ Critical interior parts are made of
solid brass.
■ For over three decades these latch-
es have been opening and closing
hundreds of thousands of doors all
around the world.
Knob Strength Latches
109: 2
3
⁄8” backset latch for oval knobs
with square hub for 7mm spindle.
111: 2
3
⁄4” backset latch for oval knobs
with square hub for 7mm spindle.
114: 2
3
⁄8” backset latch for knobs with
star hub for
3
⁄8” dia. threaded
spindle.
116: 2
3
⁄
4” backset latch for knobs with
star hub for
3
⁄
8” dia. threaded
spindle.
Lever Strength Latches
110: 2
3
⁄
8” backset latch for levers with
square hub for 7mm spindle —
pitched.
112: 2
3
⁄4
” backset latch for levers with
square hub for 7mm spindle —
pitched.
115: 2
3
⁄8
” backset latch for levers with
star hub for
3
⁄8
” dia. threaded
spindle.
117: 2
3
⁄4
” backset latch for levers with
star hub for
3
⁄8” dia. threaded
spindle.
2
7
/
8
"
SPECIFY 2
3
/
8
" OR 2
3
/
4
" BACKSET.
NO. 013 “T”
STRIKE —
STANDARD
FACEPLATE
Knob and Lever Latchsets
Best
Brass
Values
b
Emblem denotes
Best Brass Values line.
LATCHSETS
www.OmniaIndustries.com
■
973.239.7272
■
Fax:[phone]
3
PRODUCT DATA
DRAWINGS NOT TO SCALE
Assembly Detail
NO. 014
“FULL LIP” STRIKE —
OPTIONAL
NO. 019
STRIKE —
OPTIONAL
OMNIA
OMNIA
All Omnia lever latchsets
meet ADA accessibility requirements.
catalog.final.8.29.01 8/5/02 12:08 PM Page 3