Specification Sheet

26
PRODUCT DATA
MORTISE AND DEADBOLT LOCKSETS
w w w . O m n i a I n d u s t r i e s . c o m
■
9 7 3 . 2 3 9 . 7 2 7 2
■
F a x : 9 7 3 . 2 3 9 . 5 9 6 0
26
Deadbolt Locksets
Standard — A
Latchbolt operates by knob or lever from either side. Deadbolt activated by key outside and turnpiece inside.
Double Cylinder — AC
Latchbolt operates by knob or lever from either side. Deadbolt activated only by key from either side.
Tubular Deadbolt with Mortise Cylinder
■ Available with backset of 2
3
⁄8” or 2
3
⁄4”.
■ Supplied for 2
3
⁄8” backset and 1
3
⁄4” door thickness
unless otherwise specified.
■ Fits narrow stiles of less than 4”.
■ For 2
3
⁄8” backset, stile width can be as narrow as 3
5
⁄8”.
■ For 2
3
⁄4” backset, stile width can be as narrow as 4”.
■ Suitable for most pre-existing bores for cylindrical locks.
■ Full 1” throw deadbolt.
■ Supplied with Schlage “C” keyway as a standard.
Available on special order with a variety of other
keyways and key combinations.
■ Deadbolt employs standard mortise cylinder for ease
of re-keying and key changes.
Tubular Latch Specifications
■ All dimensions are standard for most replacement
installations.
■ Tough, non-rusting materials used throughout.
Face covers and strikes are solid brass.
■ Critical interior parts are made of solid brass.
■ For almost four decades these latches have been
opening and closing hundreds of thousands of doors
all around the world.
Specify either 2
3
⁄8” or 2
3
⁄4” backset.
BACKPLATE
FACEPLATE
HIGH SECURITY DEADBOLT
HEAVY DUTY TUBULAR LATCH
■ Auxiliary deadbolt kits (with collar) are also available. See pages 41- 43. ■
2
3
⁄8” or 2
3
⁄4” backset.
Fits in 2
1
⁄8” standard bore
DRAWINGS NOT TO SCALE
11000/12000 PLATES STANDARD
WITH 5
1
⁄2” CC FOR DEADBOLTS
2
3
⁄8” or 2
3
⁄4” backset.