User's Manual
To receive further information, please contact
OMNIKEY
E-Mail: support@omnikey.com
or visit our homepage www.omnikey.com
CardMan
®
5121 User’s Guide - Draft - Oct 2004 Subject to change without notice Copyright © 2004 by OMNIKEY
RFID Smart Card Reader Technolog
y
CardMan
®
5121 User’s
DRAFT
Diagnostic Tool - Testing your CardMan 5121
After finishing the installation of the OMNIKEY CardMan 5121 driver, you will find a diagnostic tool icon in
your Control Panel. Double-click the icon to start the tool. In addition to the “General” tab sheet, you should
see an OMNIKEY CardMan 5121 sheet. Clicking it, you see the status of your reader.
Hold a contactless smart card near the OMNIKEY logo on the top side of the housing. You should now see
the name of the card and the serial number. The bottom line shows the protocol T=CL (contactless).
When inserting a contact smart card in the reader’s slot, you see the ATR of the card and the protocol for
contact communication (T=0, T=1, synchronous – depending on the card).