User's Manual

User's Manual - English
Introduction
This manual describes the physical behaviour, short data sheet
and conformities of OMNIKEY's CardMan
®
5321, a combined
contact and contactless smart card reader.
To install your CardMan
®
5321 please follow the steps as
described in the “CardMan
®
5321 Installation Guide”.
If you are developing applications using CardMan
®
5321,
please refer to the “CardMan
®
5321 Developer’s Guide”.
For other detailed information please contact the OMNIKEY
support: [e-mail]
Box content
• Smart card reader with fixed USB cable
• This manual
The required drivers for operating your reader can be found in
the internet at
http://www.omnikey.com
Overview
The CardMan
®
5321 is a dual interface PC-linked reader that
reads and writes both 13.56 MHz RFID contactless smart cards
and virtually any contact smart card. The dual interface feature
economically supports end-user environments where both
contactless and contact smart card technology may be in use.
The CardMan
®
5321 is a USB plug and play device. The USB
cable is fixed to the reader. To connect the reader with your PC,
plug the USB connector to an unused USB port of your
computer.
When the reader is working the LED on the left is lighting up
green. If the reader is not working consult the “CardMan
®
5321
Installation Manual” for driver setup.
2 RFID Smart Card Reader CardMan
®
5321