User's Manual

User's Manual - English
For using a contact card, put the card with the contacts facing
up, in the reader. For contactless operation, hold the card next
to the logo on top of the reader.
When the reader is exchanging data with the card (reading or
writing) the red LED on the right side is on.
Short Data Sheet
Dimensions 115mm x 95.5mm x 25.5mm
(4.53" x 3.8" x 1.0")
Weight (including light base and
adapter)
160 gr
(5.9 oz.)
Operating temperature 10-55°C (50-131°F)
Operating humidity 10-90% rH
Composition ABS
PC Connector cable 180 cm (71")
Contact Interface Durability 100,000 Insertions
Meantime between failure
(MTBF)
500,000 Hours
Host Interface USB 2.0 CCID
(also supports 1.1)
Host Data Transmission speed 12 Mbps (USB 2.0 Full
Speed)
Power supply Bus powered
Conformance Information
CE Marking
The shipped version of this device complies with the
requirements of the directives 89/336/EWG,
73/23/EWG and 1999/5/EG.
RFID Smart Card Reader CardMan
®
5321 3