User's Manual

UM-003-A OPS243-A User Manual 8 OmniPreSense Corporation
Speed Output Units (-A, -C Doppler only) – read or set the units for the velocity output. Units
supported include m/s (default), cm/s, ft/s, km/hr, and miles per hour.
Command
Name
R/W
Value
U?
Current Velocity Units
Read
{"Units":"m-per-sec"}
UC
Centimeters per second
Write
{"Units":"cm-per-sec"}
UF
Feet per second
Write
{"Units":"ft-per-sec"}
UK
Kilometers per hour
Write
{"Units":"km-per-hr"}
UM
Meters per second
Write
{"Units":"m-per-sec"}
US
Miles per hour
Write
{"Units":"mph"} Calculations are based on the
international mile (1,609.344 m per mile).
Range Output Units (-B, -C FMCW only) – read or set the units for the range output. Units supported
include meter (default), centimeter, feet, inch, and yards.
Command
Name
R/W
Value
u?
Current Range Units
Read
{"Units":"Value", "RangeUnit":"m"}
{"Resolutions":"Value",
"RangeResolution_m":0.0777}
uM
Meters
Write
{"Units":"Value", "RangeUnit":"m"}
{"Resolutions":"Value",
"RangeResolution_m":0.0777}
uC
Centimeters
Write
{"Units":"Value", "RangeUnit":"cm"}
{"Resolutions":"Value",
"RangeResolution_cm":7.7710}
uF
Feet
Write
{"Units":"Value", "RangeUnit":"ft"}
{"Resolutions":"Value",
"RangeResolution_ft":0.2550}
uI
Inch
Write
{"Units":"Value", "RangeUnit":"in"}
{"Resolutions":"Value",
"RangeResolution_in":3.0594}
uY
Yards
Write
{"Units":"Value", "RangeUnit":"yd"}
{"Resolutions":"Value",
"RangeResolution_yd":0.0850}
Data Precision – set the number of digits for the data reported.
Command
Name
R/W
Value
Fn
Decimal Places
Write
Set n to the number of decimal places to be
reported. For example, setting to F2 will
report 2 decimal places (ex. 10.35). F0 will
provide the integer value only. Valid values of
n are 0-5.
F?
Decimal Place Setting
Read
Query the number of decimal places set.