MU12Ba 12" Active Subwoofer MU Series Pro Loudspeaker System User Manual UM- MU1 2 B a - 2 0 0 9 0 8 0 1 v e r A
SAFETY INSTRUCTIONS PLEASE READ THIS MANUAL FIRST Thanks for buying products. Read this manual first as it will help you operate the system properly. Please keep this manual for future reference. WARNING: This product must be installed by professionals. When using the hanging and rigging parts that are not appointed, please ensure the intensity of the structure comply with the local safety criterion. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
MU12Ba CONTENT MU series professional loudspeaker system CONTENT INTRODUCTION 3 Features 3 Description 3 Applications 3 AMPLIFIER MODULE 4 Rear Panel 4 INSTALLATION 5 Installation Accessories 5 Installation Reference 5 TECHNICAL SPECIFICATION Technical Sheet 6 Frequency Response And Impedance Curve 6 2D Dimension 7 Product information may be updated without notification, please visit www.elderaudio.com for latest update.
MU12Ba INTODUCTION MU series professional loudspeaker system MU12Ba Single 12" active subwoofer Features Single 12" active phase inverted subwoofer. Built-in 350W/4ohm power amplifier with high-cut. One input and one output. 300W woofer with 3" voice coil. Built-in crossover make the sound very natural. Powder coated grille can be used for 5 years outdoors, backside foam of grille prevent the rain. Advanced paint materials and the painting technology make the surface very rigid.
MU12Ba AMPLIFIER MODULE MU series professional loudspeaker system Introduction Of Amplifier Module 1 4 5 3 2 1 HIGH CUT 3 2 USE ONLY WITH A 250V FUSE OUTPUT LIMIT INV OFF ON MU12Ba ACTIVE HEM AX.CONSUMPTIONP OWER4 50W ACTIVE SUB WOOFER 0 1 VOLUME 3 2 No.: INPUT 6 7 8 9 1. High-cut 2. Overload indicator 3. Mic/signal output 4. Fuse 5. Power supply socket 6. Phase inverted switch 7. Volume control 8. Status indicator 9. Mic/signal input 10. Power supply switch 11.
MU12Ba INSTALLATION MU series professional loudspeaker system Installation Accessories Installation Reference The support flange in the top of MU12Ba is for the pole mounting application with MU8a. 1. Stack 1. Speaker stand MU8a MU12Ba Warning: Make sure the mounting accessories safety factor not less than 5:1 or meet the local standard during installation .
MU12Ba TECHNICAL SPECIFICATION MU series professional loudspeaker system Specification Frequency response(-3dB): Max.SPL(1m): Transducer: Input: Connector: Input impedance(line): Input level: Input overloading level: Frequency response of AMP: High cut: Wire connection: Heat radiation: Power cable: Voltage: Safety voltage range: Power supply consumption power(static) : Power supply consumption power(dynamic) : 40Hz-250Hz 118dB/124dB(PEAK) 1X 12" Neodymium woofer, 8ohm, 300W one channel balanced input(6.
MU12Ba TECHNICAL SPECIFICATION MU series professional loudspeaker system 2D Dimension 452mm [17.80in] 226mm [8.90in] Top view 320mm [12.60in] 460mm [18.11in] Front view Back view 370mm [14.
Notes: