MU215 Two Way Full Range Speaker With Dual 15" Woofers MU Series Pro Loudspeaker System User Manual UM- MU2 1 5 - 2 0 0 9 0 8 2 7 v e r A
SAFETY INSTRUCTIONS PLEASE READ THIS MANUAL FIRST Thank you for a buying for future reference. product. Read this manual first as it will help you operate the system properly. Please keep this manual WARNING: This product must be installed by professionals. When using hanging brackets or rigging other than those supplied with the product, please ensure they comply with the local safety codes.
MU215 CONTENT MU Series Pro Loudspeaker System CONTENT INTRODUCTION Features 3 Description 3 Applications 3 CONNECTION 4 Terminal Plate 4 NL4 Connection 4 System Connection Reference 4 Loudspeaker Connection 5 INSTALLATION 6 Mounting Accessories 6 Installation Reference 6 TECHNICAL SPECIFICATION 7 Technical Sheet 7 Frequency Response And Impedance Curve 7 2D Dimension 8 Product information may be updated without notification, please visit www.elderaudio.
MU215 INTODUCTION MU Series Pro Loudspeaker System MU215 Built-in crossover dual 15" full range speaker Features Two way full range phase inverted speaker with double 15" woofers and 3" compression driver. Dispersion 900x40 0. Advanced free protection crossover assure the reliability of driver. Sensitivity 98dB, Max. SPL 126dB. Rated power 600W, Peak power 2400W. Standard flying mounting system. Single plying point can bear 385Kg, which is very safe for the installation.
MU215 CONNECTION MU Series Pro Loudspeaker System Two NL4 connectors are available for amplifier connection. Paralelled connector is very convenient for another speaker connection. Terminal Plate 1+ 1- INPUT MU215 Warranty does not cover damage caused by incorrect installation, operation or overload. No.: 1+ Crossover INPUT 1- 1+ 1- : INPUT 1- 2+ 1+ 45Hz-16kHz 600W SENSITIVITY(1W/1m) 98dB IMPEDANCE 4 NET WEIGHT 48kg ELDER AUDIO MANUFACTURE CO., LTD NL4 Connection 1. Connect 2.
MU215 CONNECTION MU Series Pro Loudspeaker System Speaker Wiring 1. Banana plugs to NL4 Connect to speaker Connect to amplifier 2- 1+ 2+ 1- 2. NL4 to NL4 Connect to speaker Connect to amplifier 1+ 2- 1+ 2+ 2- 2+ 1- 1- 3. Consumption curve of connection cable(Only for reference, the result is different if adopting the different cables) 76 250 8 Ohm 150 61 46 4 Ohm 100 2 Ohm 50 0 30 Wire length Meters Wire length Feet 200 15 0 4.0 2.5 1.5 1.0 0.75 0.
MU215 INSTALLATION MU Series Pro Loudspeaker System Mounting Accessories(Optional) Installation Reference The standard flying mounting hardware is very convenient for different installation and applications. 1. Vertical flying mounting installation: 1. Standard flying mounting ring 2. Mobile Caster Caster: 100 *34mm 2 pcs Screws: M8 *30 Hexagon 8 pcs Spring washers: Flat pad: 8 (Black) 8 pcs 8 (Black) 8 pcs PE bag: 2 pcs Carton: 1 pc Transportation reference 2.
MU215 TECHNICAL SPECIFICATION MU Series Pro Loudspeaker System Specification Speaker Testing Method System: Passive full range wooden speaker with painting Tweeter: 1 3" Compression Driver 1. Frequency Response Use Pink noise to test the speaker in the anechoic chamber, adjust the level to make the speaker work at its rated impedance and set the output power at 1W, then test the frequency response 1m away from the speaker.
MU215 TECHNICAL SPECIFICATION MU Series Pro Loudspeaker System 2D Dimension 530mm [20.87in] Top view 530mm [20.87in] Front view Back view 1075mm [42.
Notes:
