MU8 Two way full range passive speaker MU series professional loudspeaker system User Manual UM- MU8 - 2 0 0 9 0 4 3 0 ver A
SAFETY INSTRUCTIONS PLEASE READ THIS MANUAL FIRST Thanks for buying products. Read this manual first as it will help you operate the system properly. Please keep this manual for future reference. WARNING: This product must be installed by professionals. When using the hanging and rigging parts that are not appointed, please ensure the intensity of the structure comply with the local safety criterion. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
MU8 CONTENT MU series professional loudspeaker system CONTENT INTRODUCTION Features 3 Description 3 Applications 3 CONNECTION 4 Terminal Plate 4 NL4 Connection 4 System Connection Reference 4 Loudspeaker Connection 5 INSTALLATION 6 Installation Accessories 6 Installation Reference 6 TECHNICAL SPECIFICATION 7 Technical Sheet 7 Frequency Response And Impedance Curve 7 2D Dimension 8 Product information subjects to be updated without notification, please visit www.elderaudio.
MU8 INTODUCTION MU series professional loudspeaker system MU8 Two way full range passive speaker Features Two way full range phase inverted speaker, which adopt Coaxial transducer with 8" LF part and 1.4" HF part Single Neodymium magnet design on the coaxial transducer Dispersion is 90oX90 o. Advanced crossover design make sure the reliability of tweeter. Sensitivity is 94dB, Max is SPL 115dB. RMS power is 150W, is peak power 600W. Support flange, three mounting points.
MU8 CONNECTION MU series professional loudspeaker system Two NL4 connectors are available for amplifier connections. Paralelled connector is very convenient for another speaker connection. 1+ 1- INPUT Terminal Plate 1+ MU8 Crossover Warranty does not cover damage caused by incorrect installation, operation or overload. 1- + - LOW + - HIGH No.: NL4 Connection INPUT 1+ 1- : INPUT 1- 2+ 1+ 1. Connect 2- 2.
MU8 CONNECTION MU series professional loudspeaker system Speaker Wiring 1. Banana plugs to NL4 Connect to speaker Connect to amplifier 2- 1+ 2+ 1- 2. NL4 to NL4 Connect to speaker Connect to amplifier 1+ 2- 1+ 2+ 2- 2+ 1- 1- 3. Consumption curve of connection cable(Only for reference, the result is different if adopting the different cables) 76 250 8 Ohm 150 61 46 4 Ohm 100 2 Ohm 50 0 30 Wire length Meters Wire length Feet 200 15 0 4.0 2.5 1.5 1.0 0.75 0.
MU8 INSTALLATION MU series professional loudspeaker system Installation Accessories Installation Reference Support flange and three special mounting points are very convenient for the different applications. 1.Reference A 1. Speaker stand 2.Reference B 3.Reference C Warning: Make sure the mounting accessories safety factor not less than 5:1 or meet the local standard during installation .
MU8 TECHNICAL SPECIFICATION MU series professional loudspeaker system Speaker Testing Method Specification System: Full range passive speaker 1. Frequency response Tweeter: 1X1.4" compression driver Use Pink noise to test the speaker in the anechoic room, adjust the level to make the speaker work at its rated impedance and the power output is 1W, then test the frequency response 1m away from the speaker.
MU8 TECHNICAL SPECIFICATION MU series professional loudspeaker system 2D Dimension 262mm [10.31in] Top view 280mm [11.02in] Front view Back view 380mm [14.
Notes:
