QS1000 10" Two Way Full Range Pro Speaker System User Manual UM- QS 1 0 0 0 - 2 0 0 9 0 8 3 1 v e r A
SAFETY INSTRUCTIONS PLEASE READ THIS MANUAL FIRST Thank you for a buying for future reference. product. Read this manual first as it will help you operate the system properly. Please keep this manual WARNING: This product must be installed by professionals. When using hanging brackets or rigging other than those supplied with the product, please ensure they comply with the local safety codes.
QS1000 CONTENT 10" Two Way Full Range Pro Speaker System CONTENT INTRODUCTION Features 3 Description 3 Applications 3 CONNECTION 4 Terminal Plate 4 System Connection Reference 4 INSTALLATION 5 Installation Accessories 5 Installation Reference 5 TECHNICAL SPECIFICATION 6 Technical Sheet 6 Frequency Response And Impedance Curve 6 7 2D Dimension Product information subjects to be updated without notification, please visit www.elderaudio.com for latest update.
QS1000 INTRODUCTION 10" Two Way Full Range Pro Speaker System QS1000 10" Two Way Full Range Pro Speaker System Features Two new 4-inch paper cone mid-high frequency drivers. 10-inch paper cone low frequency driver. High intensity injection moulding cabinet. Dispersion 1200x 1200. Frequency response 45 Hz 20k Hz (-3dB). Sensitivity 90dB, Max SPL 111 dB. 3 x M8 hang point. Customizable grill and cabinet color. Description QS1000 is a 10"2-way full range speaker system with wide dispersion.
QS1000 CONNECTION 10" Two Way Full Range Pro Speaker System QS 1000 connects the amplifier with a wire clamp. Two groups of parallel terminals enable it to connect to another speaker conveniently.
QS1000 INSTALLATION 10" Two Way Full Range Pro Speaker System Installation Accessories Installation Reference QS1000 has 3 hanging points to work together with the special designed accessories for fast and convenient hanging, wall-mounting and on standing with adjustable angles. 1. Ceiling 1. Hanging Bracket 2. Wall 2. Wall Bracket 3. Standing Bracket Warning: Make sure the mounting accessories safety factor not less than 5:1 or meet the local standard during installation . 3.
QS1000 TECHNICAL SPECIFICATION 10" Two Way Full Range Pro Speaker System Speaker Testing Method Technical Sheet Two way full range speaker 1. Frequency response Tweeter: 2 4" High frequency drivers Woofer : 1 10" Woofer Use Pink noise to test the speaker in the anechoic room, adjust the level to make the speaker work at its rated impedance and the power output is 1W, then test the frequency response 1m away from the speaker.
QS1000 TECHNICAL SPECIFICATION 10" Two Way Full Range Pro Speaker System 2D Dimension Toy view Side view Front view Back view Bottom view 7
Notes:
