T4.6 4 x 6 line array full range column speaker User Manual UM - T 4 .
SAFETY INSTRUCTIONS PLEASE READ THIS MANUAL FIRST Thank you for a buying for future reference. product. Read this manual first as it will help you operate the system properly. Please keep this manual WARNING: This product must be installed by professionals. When using hanging brackets or rigging other than those supplied with the product, please ensure they comply with the local safety codes.
T4.6 CONTENT T series line array full range column speaker CONTENT PRODUCT INTRODUCTION 3 Main Features 3 Product Description 3 Applications 3 CONNECTION 4 Push Terminals 4 System Reference Diagram 4 INSTALLATION 5 Optional Installation Accessories 5 Installation Options 5 TECHNICAL SPECIFICATIONS 6 Specifications 6 Frequency Response and Impedance Curve 6 7 Dimensions Product information may be updated without notification, please visit www.elderaudio.com for latest update.
T4.6 PRODUCT INTRODUCTION T series line array full range column speaker T4.6 4 x 6 line array full range column speaker Main Features A vertical line array of 6 x 4" full range transducers providing high fidelity sound. Frequency response 90Hz-16KHz(-3dB). Sensitivity 92dB, Max SPL 115dB. Dispersion 180 x 25°. Rated power 180w, max power 720w. Plywood cabinet with durable textured paint finish . Can be installed alone or stacked in multiples using the optional accessories.
T4.6 CONNECTION T series line array full range column speaker The T4.6 rear panel has two input connectors. You can choose to use either the 4 way push terminal connector or the NL4 speakon connector. The two connectors are paralleled for through connection.
T4.6 INSTALLATION T series line array full range column speaker Optional Installation Accessories Installation Options The T4.6 cabinet has 3 flying points, plus a stand mount adaptor to ensure fast and easy installation. To install stacked speakers there are an optional coupling brackets. 1.Flying 1.Wall bracket 2.Speaker coupling brackets Ceiling mount 2. Stand mount Extension mount Wall mount 3. Speaker coupling 3.Stand mount adaptor 4.
T4.6 TECHNICAL SPECIFICATIONS T series line array full range column speaker Speaker Testing Method Specifications 1. Frequency Response Product: Passive Wooden Speaker Use Pink noise to test the speaker in the anechoic chamber, adjust the level to make the speaker work at its rated impedance and set the output power at 1W, then test the frequency response 1m away from the speaker.
T4.6 TECHNICAL SPECIFICATIONS T series line array full range column speaker Dimensions 169mm [6.65in] Top view 135mm [5.32in] Front view Back view 100mm [3.94in] 93mm [3.66in] 800mm [31.50in] 300mm [11.81in] Side view 52mm [2.
Notes:
