Omnitracs Active Mobile Gateway (AMG-C) User Reference Manual 80-JE177-1 Rev.
Contents 1. Product Overview .................................................................................................................. 2 2. Product Feature Introduction ................................................................................................. 3 3. Interface Description .............................................................................................................. 6 Front View ....................................................................................
1. Product Overview Product name: ACTIVE MOBILE GATEWAY WITH COMM (AMG-C) Model No.: CV90-JE103 Brand: OMNITRACS The AMG-C system components include: • • Power I/O cable AMG-C hardware and fasteners 80-JE177-1 Rev. B MAY CONTAIN U.S.
2. Product Feature Introduction Network: • EVDO / CDMA / UMTS / LTE / GPS / GLONASS Body: • • Dimensions: 165 x 95 x 32.5 mm Weight: 375g • SIM Card: Non-Removable Dual SIM card slot (AT&T, Sprint) Platform: • Android 7.1 Nougat 80-JE177-1 Rev. B MAY CONTAIN U.S.
Comms: • WLAN: 2.4 GHz / 5GHz dual band IEEE802.11 a/b/g/n/ac Wave2 WLAN (Build in APP will be used for Wi-Fi feature set up and link up) 80-JE177-1 Rev. B MAY CONTAIN U.S.
• Bluetooth: 4.2 BR/EDR/LE Battery: • 710 mAh polymer Li-ion backup battery (Not used as main power supply source) 80-JE177-1 Rev. B MAY CONTAIN U.S.
3. Interface Description Front View • • • USB OTG Connector: This connector can be used for charging USB powered device and is able to transfer logging data. Driver Notification LED: This RGB LED is used to provide notifications to drivers if there are any activity happens to the unit. ELD LED: This RGB LED is used to provide notifications to drivers if there are any activity happens to the data logging. 80-JE177-1 Rev. B MAY CONTAIN U.S.
Rear View • • Main Power Connector: This connector is used to connect the power cable from vehicle battery power supply. Expansion I/O Connector: This connector is used to connect the optional I/O expansion • cable. The I/O expansion cable consist of a protected external 5V power supply, protected external vehicle battery power supply, Driver Notification & ELD LED expansion control ports and a general purpose RS232 serial connection (Tx/Rx).
4. Installation Instructions Before starting the installation, inspect the vehicle to determine an installation location.
Warning statement: Class A Device FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
IC Statement: ICES-003 statement CAN ICES-3 (A)/NMB-3 (A) RSS-Gen statement Canada, Industry Canada (IC) Notices This device complies with Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
RSS-247 statement Caution: User should also be advised that: (i) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz shall comply with the e.i.r.p. limit. High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz, 5470-5600 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. (ii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p.
Omnitracs, LLC 717 N. Harwood Street, Suite 1300 Dallas, TX 75201 U.S.A. © 2019 Omnitracs, LLC. All rights reserved. Omnitracs is a trademark of Omnitracs, LLC. All other trademarks are the property of their respective owners. Omnitracs endeavors to ensure that the information in this document is correct and fairly stated, but Omnitracs is not liable for any errors or omissions. Published information may not be up to date, and it is important to confirm current status with Omnitracs.
