User Manual

4.3 PORT CONFIGURATION
The Port configuration screen provides access to the port level configuration parameters, such as, Port
Access, Bandwidth Control, SFP information, 802.3ah, Port VLANs, T agged VLANs and cNode Loopback.
To access the Port configuration screen, select ‘C’ from the Module configuration screen and press
<ENTER>. The Port configuration screen will appear.
PI
Module - iConverter 2FXM iConverter, Serial Agent
Identifier -
Chassis Number = 1 Port VLAN Path Setup
Slot Number = 11 ----------------------------------
Model Number = 8959-0 11: Port 1 to Port 2 Enable On
12: Port 1 to BP A Enable On
Port Access Control Setup 13: Port 1 to BP B Enable On
---------------------------------- 14: Port 2 to BP A Enable On
1: Port 1 Enable On 15: Port 2 to BP B Enable On
2: Port 2 Enable On 16: BP A to BP B Enable On
17: Port 1 to Mngmnt Enable On
Enhanced Features 18: Port 2 to Mngmnt Enable On
---------------------------------- 19: BP A to Mngmnt Enable On
3: 802.1Q Processing Enable Off 20: BP B to Mngmnt Enable On
4: Configure Tag VLAN Control
5: Configure VLAN Membership Bandwidth Control
6: Save TAG VLAN parameters --------------------------------
7: Configure 802.3ah parameters 21: Ingress rate Port 1 No Limit
8: Configure 802.3ah events 22: Egress rate Port 1 No Limit
9: SFP Information 23: Ingress rate Port 2 No Limit
10: cNode Loopback 24: Egress rate Port 2 No Limit
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
SA
Module - iConverter 2FXM iConverter, Serial Agent
Identifier -
Chassis Number = 1 Port VLAN Path Setup
Slot Number = 11 ----------------------------------
Model Number = 8959-0 11: Port1 to Port2 Enable On
12: Port1 to Mngmnt Enable On
Port Access Control Setup 13: Port2 to Mngmnt Enable On
----------------------------------
1: Port 1 Enable On Bandwidth Control
2: Port 2 Enable On --------------------------------
14: Ingress rate Port 1 No Limit
Enhanced Features 15: Egress rate Port 1 No Limit
---------------------------------- 16: Ingress rate Port 2 No Limit
3: 802.1Q Processing Enable Off 17: Egress rate Port 2 No Limit
4: Configure Tag VLAN Control
5: Configure VLAN Membership
6: Save TAG VLAN parameters
7: Configure 802.3ah parameters
8: Configure 802.3ah events
9: SFP Information
10: cNode Loopback
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
Page 28