User Manual

4.3.1 Port Access
The Port Access option allows the ports to be disabled/enabled while maintaining the port configuration
and network link
To configure Port Access, select option 1 for the Fiber port 1 and option 2 for the Fiber port 2 from the Port
configuration screen.
4.3.2 Bandwidth Control
The 2FXM Bandwidth Control is accessed by selecting options 21- 24 or 14 - 17 depending on the module
type; plug-in or standalone.
The 2FXM provides separate ingress and egress rate control on each port.
Ingress values will be displayed when the option is selected. Values of 128Kbps, 256Kbps, 512Kbps,
1Mbps, 2Mbps, 4Mbps, 8Mbps and Full bandwidth are available.
Egress values will be displayed when the option is selected. Values of 128Kbps, 256Kbps, 512Kbps,
1Mbps, 2Mbps, 4Mbps, 8Mbps and Full bandwidth are available.
PI
Module - iConverter 2FXM iConverter, Serial Agent
Identifier -
Chassis Number = 1 Port VLAN Path Setup
Slot Number = 11 ----------------------------------
Model Number = 8959-0 11: Port 1 to Port 2 Enable On
12: Port 1 to BP A Enable On
Port Access Control Setup 13: Port 1 to BP B Enable On
---------------------------------- 14: Port 2 to BP A Enable On
1: Port 1 Enable On 15: Port 2 to BP B Enable On
2: Port 2 Enable On 16: BP A to BP B Enable On
17: Port 1 to Mngmnt Enable On
Enhanced Features 18: Port 2 to Mngmnt Enable On
---------------------------------- 19: BP A to Mngmnt Enable On
3: 802.1Q Processing Enable Off 20: BP B to Mngmnt Enable On
4: Configure Tag VLAN Control
5: Configure VLAN Membership Bandwidth Control
6: Save TAG VLAN parameters --------------------------------
7: Configure 802.3ah parameters 21: Ingress rate Port 1 No Limit
8: Configure 802.3ah events 22: Egress rate Port 1 No Limit
9: SFP Information 23: Ingress rate Port 2 No Limit
10: cNode Loopback 24: Egress rate Port 2 No Limit
Enter Choice, Previous Screen(0), (H)elp, E(x)it >20
New Rate (0= No Limit, 1=128Kbps, 2=256Kbps, 3=512Kbps,
4=1Mbps, 5=2Mbps, 6=4Mbps, 7=8Mbps) > 0
Page 29