User manual

00026389.DOC, Version 1.1
20/31
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
P
lease use the original packaging if the device is to be transported.
Never remove the serial barcode from the device as this would make the guarantee void.
Please consider that unauthorized modifications on the speaker-system are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, hearing loss etc.
3.1 Features
Powered live mixer
Low noise 6/8 channel Mic/Line-mixer
2/4 mono inputs with XLR-sockets, +48V Phantom-power and balanced line inputs
Insert or Direct Out for every mono channel
• 2 stereo inputs via balanced jacks
Integrated effect unit with 9-level echo
3-band EQ for all inputs
Peak-LED per mono input
Aux-Send per channel for controlling external effectors
Aux-Return with balanced ¼" jack socket
Separate Main Mix, Group and headphones outputs
Tape inputs and outputs
7-band-equalizer for fine-tuned sound
Precise 10-LED meter
Output power 2 x 150 W/4 Ohms/2 x 200 W/4 Ohms
4. INSTALLATION
Install the device on a solid, plane, anti-slip, vibration-free, oscilation-free and fire-resistant surface.
Make sure that the power switch is set to OFF. Before you connect the devices, all units have to be switched
off.
4.1 Inputs
A good cable run improves the sound quality remarkably. Input cables should be short and direct, since high
frequencies will mostly be absorbed if the cables are unnecessarily long. Besides that a longer cable may
lead to humming and noise trouble. If long cable runs are unavoidable, you should use balanced cables.
In order to obtain highest sound quality, only use high-quality cables for connecting the devices. Make sure
that the cables are properly fixed.
MIC
RR
LINE
L/MONOL/MONO
INSERT
4 5-6
7-8
STEREO STEREO