User manual

00026389.DOC, Version 1.1
22/31
4.2 Inserts
Inserts can be used for dynamic processors, equalizers or other sound effectors modifying the original signal
completely.
The signal is separated, led outside and inserted at the same position after being modified.
The inserts are pre EQ, AUX and fader and are sent and received via the same jack plug.
Occupation Insert-connections:
Insert-connectionvia
Tip
Sleeve
Strainreliefclamp
stereo1/4"jackplug
Ring
Tip=
Output
Sleeve=
Ground/Shield
Ring=
Input
Effector-
input
Effector-
output
Tip=
Output
Sleeve=
Ground/Shield
Ring=
Input
Mixeroutput
stereo1/4"jackplug
Connect the mixer‘s output signal via a split-cable with the effector’s input (tip&sleeve) and output
(ring&sleeve).
4.3 Connections
AUX SEND/RETURN
Connect your effectors or monitor system/zone system with
the AUX SEND-sockets.
AUX is POST-fader and can be used for your effectors. You
can adjust the signal level for the AUX SEND-socket via the
AUX SEND-control.
Signal returns from the effector can be inserted via the AUX
RETURN-socket. The signal level of the AUX RETURN-
socket can be adjusted via the Return-control.
PHONES
Connect your headphones with the PHONES-socket.
MAINLEFT
MAINRIGHT
GROUPOUT
G1 G2