User manual

00026389.DOC, Version 1.1
23/31
TAPE IN/TAPE OUT
F
or recording, connect your tape recorder or cassette deck to
the TAPE OUT-sockets. The TAPE OUT level will not be
influenced by the Main Mix fader. You can set the output
level with the channel faders, the tone controls and the GAIN
control.
Y
ou can insert the tape-signal via the TAPE IN-sockets. You
can activate the Tape-signal via the TAPE ON-switch.
MAIN OUT
Connect the main output either via two jack plugs or the
balanced XLR-plugs.
GROUP OUT
Via the GROUP OUT-sockets, you can connect the group
signal with a headphones amplifier, e.g. for the background
singers. You can adjust the signal level via the group fader.
SPEAKER OUT
Your speaker-system is equipped with 4-pole, lockable Speaker-sockets. For locking the connection turn the
plug to the right. For unlocking pull the unlock button and turn the plug to the left and pull it out of the socket.
Connection Speaker-socket
R
L
L
TAPE
R
TAPEON
TAPEIN
TAPEOUT
SEND
RETURN
AUX
P
HONES