User manual

00042241.DOC, Version 1.3

17/21

5 BNC jacks A/B

For connecting the supplied antennas.

6 Mixed output

Output of the master signal of both channels (6.3 mm

ack, unbal.) for connection to a microphone or line input

of a mixer or amplifier.

7 Unbalanced channel outputs

Unbalanced channels 6.3 mm jack outputs for the output

signal from the respective channel. For connection to

unbalanced microphone inputs or highly sensitive line

inputs.

5 Battery indicator

If the LED lights up, the battery is exhausted.

6 On/off switch with power indicator

• left position: on (red LED lights)

• right position: off

1 Screw cap

2 Battery compartment for a 9 V battery

3 Gain control for the input amplification

4 Mute switch

• upper position: on (basic setting)

• lower position: mute

8 Balanced channel outputs

3-pin, balanced XLR outputs for the output signal from

the respective channel. For connection to balanced

microphone inputs of a mixer or amplifier.

9 DC connection

Connect the supplied power unit here.