Manualshelf

Operating instructions

ManualsBrandsOmnitronic Manualsaudio & home theatreDJS-1200 Scratch workstation
21222324252627282930
10602296X10NXS_V_1_1.DOC
29/86
26. TAP-BUTTON
Via the Tap-button, you can display the beats per minute of a track. Press the button in the rhythm of the
music. The display shows the current beats per minute (BPM).
27. BEAT SYNC-BUTTONS
Via the Beat Sync-buttons, you can adjust the effects to the current track's beat. Please refer to the
explanations under 6.12 Beat Sync-function.
28. AUTO BPM-BUTTON
Via the Auto BPM-button, you can switch the display from beats per minute (BPM) to speed-adjustment in %.
Press and hold the Auto BPM-button in order to switch form manual to automatic beatcounter.
29. AUTO CUE-BUTTON
With the Auto Cue-button, you can activate the Auto Cue-function. Please refer to the explanations under 6.7
Cueing.
30. BRAKE-BUTTON
With the Brake-button, you can activate the Brake-effect and the Motor Off-effect. Please refer to the
explanations under 6.11 Effects.
31. REVERSE-BUTTON
With the Reverse-button, you can activate the Reverse-function. Please refer to the explanations under 6.11
Effects.
32. MAIN TEMPO-BUTTON
With the MAIN TEMPO-button, you can adjust the pitch of an adjusted playback speed. Press the MAIN
TEMPO-button in order to adjust the pitch.
33. PITCH CONTROL-BUTTON
With this button, you can switch the speed-adjustment via the pitchfader off (LED off). Please refer to 6.6
Adjusting the playback-speed.
34. 8/12/16/100%-BUTTON
With this button, you can select the speed-adjusting range between +/- 8 % (LED green), +/- 12 % (LED
orange) +/- 16 % (LED red) or +/- 100 % (LED flashes red). Please refer to 6.6 Adjusting the playback-
speed.
35. PITCH BEND-BUTTONS
With the Pitch Bend-buttons, you can adjust the playback-speed temporarily by up to +/- 100 %. Please refer
to 6.6 Adjusting the playback-speed.
If you press and hold the Pitch Bend - button, the playback speed decreases down to 0. This effect is
comparable with the Motor Off-effect.
36. PITCHFADER
You can adjust the desired speed with the Pitchfader. The display shows the current percentage.
37. CD SLOT IN
Insert the disc here. If a CD is inserted and the CD-player is ready for operation, the CD LED is shining.
Please refer to the explanations under 6.2 CD Slot In.