User manual

00039532.DOC, Version 2.1
16/20
4.2 Operating elements and connections
1 Microphone inputs MIC 1 and MIC 2
Input jacks (bal.) for connecting microphones via XLR or
6.3 mm jack plug.
2 Assignment switches 1 to 3
Assignment switches 1 to 3 (with LED), to assign the
microphone channels MIC 1 and MIC 2 individually to the
three master channels:
button 1 pressed: microphone channel switched to ZONE 1,
button 2 pressed: microphone channel switched to ZONE 2,
button 3 pressed: microphone channel switched to ZONE 3.
3 Level controls with peak LED
Level controls for the microphone channels MIC 1 and
MIC 2. If the LED lights permanently, the corresponding
channel is overloaded.
4 Tone controls
3-way equalizer for the microphone channels MIC 1 and
MIC 2: HIGH, MID, BASS.
5 LED level indicators
10-digit LED level indicators for the microphone channels
MIC 1 and MIC 2 within the range of -20 dB to +9 dB.
6 Microphone channel on/off
On/off switches (with LED) for the microphone channels
MIC 1 and MIC 2. When the button is pressed (LED
lights), the corresponding microphone is switched on.
7 Level control for the talkover function
Adjusts the attenuation level in case of microphone
announcements.
8 Talkover on/off
On/off switch (with LED) for the talkover function. With
the button pressed (LED lights), the levels of the
channels 1 to 5 are automatically attenuated – depending
on the controls LEVEL and TIME – when announcements
are made with the microphone.
9 Assignment switches 1 to 3
Assignment switches 1 to 3 (with LED), to assign the
inputs channels 1 to 5 individually to the three master
channels:
button 1 pressed: input channel switched to ZONE 1,
button 2 pressed: input channel switched to ZONE 2,
button 3 pressed: input channel switched to ZONE 3.
10 Input selectors
For selecting the input source for channels 1 to 5. The
LEDs will verify which input is active.
11 Signal indicator for channels 1 to 5
12 Tone controls
3-way equalizer for the master channels: HIGH, MID,
BASS.
13 LED level indicators
10-digit LED level indicators for stereo master signal
within the range of -20 dB to +9 dB.
14 Assignment switches 1 to 3
Assignment switches 1 to 3 (with LED), to assign the master
channels 1 to 3 individually to both recording outputs:
button 1 pressed: ZONE 1 switched to REC,
button 2 pressed: ZONE 2 switched to REC,
button 3 pressed: ZONE 3 switched to REC.
15 Recording output
Front stereo output (RCA) for connecting a recording unit.
The recording level is independent of the position of the
output controls OUT 1 to 3.
16 Headphones input
6.3 mm jack (bal.) for connecting stereo headphones
(min. impedance 8 ).
17 Level control for the headphones output