User manual

00039532.DOC, Version 2.1
17/20
20 Buttons CUE
Buttons for prefader listening of the corresponding
channel via headphones.
21 Channel faders
Level controls for channel 1 to 5.
22 Time control for the talkover function
Adjusts the attenuation response time in case of
microphone announcements.
23 Power indicator
Lights up when the unit is powered on.
18 Control CUE/PGM
For crossfading the monitoring signal for the headphones
output.
• Left position CUE: the prefader level of the input
channel of which the CUE button is pressed is
monitored.
• Right position PGM + desired master channel selected
with the buttons REC SELECT 1 to 3: the music
program currently playing is monitored ahead of the
output controls OUT 1 to 3.
• In mid-position, a mixed signal consisting of prefader
level and of the current music program can be heard.
1
9 Level controls for the master outputs
24 AC input
Plug in the supplied power unit here.
25 Gain controls TRIM
Trimming controls for adjusting the input amplification of
channel 1 to 5 (from right to left).
26 Phono inputs
Stereo inputs (RCA) for channel 2 and channel 3 for
connecting turntables with magnetic system.
27 Line inputs
Stereo inputs (RCA) for channel 1 to 5 for connecting
units with line level outputs (e.g. CD player).
28 Master outputs
Stereo master outputs (optionally 3-pin XLR, bal. or RCA)
for connecting an amplifier or other units with line level
inputs (e.g. a further mixer, active speakers):
outputs MASTER 1 for master channel ZONE 1,
outputs MASTER 2 for master channel ZONE 2,
outputs MASTER 3 for master channel ZONE 3.
29 Recording output
Rear stereo output (RCA) for connecting a recording unit.
The recording level is independent of the position of the
output controls OUT 1 to 3.
30 Power on/off
Press this button to turn the unit on and off. When powered
on, the POWER indicator on the front panel lights up.
31 Selector switch WITH MIC/NO MIC
Adjusts the microphone level at the recording outputs REC.
• Upper position WITH MIC: full volume
• Lower position NO MIC: reduced volume
32 Level selector switch
Switches the level at the master outputs between 0.75 V
and 1.5 V.
33 GND (ground terminals)
Ground clamping screws for turntables connected to
channel 1 and channel 2.
34 Input selector switches
Switches the phono inputs to line inputs.