User manual

HEADSET MICROPHONE
USER MANUAL
www.omnitronic.com
00049584.DOC, Version 1.0
Feather-weighted headset microphone
Safety Instructions
Setting into Operation
Cleaning
Technical Specifications

 Always use the supplied windscreen to protect the microphone capsule from dust and moisture, and
reduce pop and wind noise to a minimum.
Type:.................................Condenser
Directivity pattern:.............Cardioid
Frequency response: .......20 - 20,000 Hz
Sensitivity: ........................-44 dB (± 3 dB)
Impedance: ......................1.5 k (± 30 %)
Power supply:...................1.5 - 10 V
.........................................via pocket transmitter
Current consumption:.......approx. 0.5 mA
Connection: .....................3-pin mini XLR inline jack
Cable length: ....................approx. 1.2 m
Dimensions:......................250 x 120 x 150 mm
Weight: .............................10 g
W
The headset microphone was designed for vocal sound and speech applications which
require hands-free operation Via its mini XLR inline jack the microphone is connected to a pocket
transmitter and supplied with phantom power.Awindscreen is included in the delivery.
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used
for other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
Protect the microphone against humidity and heat. The ambient temperature must always be
between -5° C and +45° C.
Put on the headset microphone and place the microphone cartridge close to the mouth into a
convenient talk position.
Connect the mini XLR inline jack of the microphone cable to the input jack of the pocket transmitter.
For cleaning the microphone only use a dry cloth. Never use chemicals or water.
HS-500
.

!
!
Please note: Every information is subject to change without prior notice. 10.10.2009 ©
HS-500
1 = ground
2 = audio signal
3 = power supply
2
31