User`s manual

00029746.DOC, Version 1.3
30/30
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
I
f the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
TECHNICAL SPECIFICATIONS
KB-208A KB-210A KB-212A KB-215A
Power supply: 115/230 V AC,
50/60 Hz ~
115/230 V AC,
50/60 Hz ~
115/230 V AC,
50/60 Hz ~
115/230 V AC,
50/60 Hz ~
Fuse: T 2 A, 250 V T 2 A, 250 V T 2 A, 250 V T 2 A, 250 V
Rated power: 80 W RMS 120 W RMS 150 W RMS 180 W RMS
Power (max.): 160 W 240 W 300 W 360 W
Components: 8" woofer, 1" horn 10" woofer, 1.35"
horn
12" woofer, 1.35"
horn
15" woofer, 1.75"
horn
Inputs:
1 Mic XLR XLR or balanced ¼"
jack
XLR or balanced ¼"
jack
XLR or balanced ¼"
jack
1 Line XLR or RCA XLR or RCA XLR or RCA XLR or RCA
Outputs:
1 Line Out - XLR or balanced ¼"
jack
XLR or balanced ¼"
jack
XLR or balanced ¼"
jack
Max. SPL: 102 dB 110 dB 115 dB 120 dB
Impedance: 4 Ohms 4 Ohms 4 Ohms 4 Ohms
Frequency-range: 65 Hz - 18 kHz 55 Hz - 18 kHz 50 Hz - 18 kHz 40 Hz - 18 kHz
Dimensions (H x W x D):
400 x 277 x 257 mm 510 x 350 x 285 mm 580 x 480 x 325 mm 740 x 555 x 400 mm
Weight: 8 kg 14 kg 18 kg 27 kg
Please note: Every information is subject to change without prior notice. 29.01.2009 ©