Operation Manual

00040292.DOC, Version 1.0
24/40
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.
Never put any liquids on the device or close to it. Should any liquid enter the device nevertheless, disconnect
from mains immediately. Please let the device be checked by a qualified service technician before you
operate it again. Any damages caused by liquids having entered the device are not subject to warranty!
Always disconnect from the mains, when the device is not in use or before cleaning it.
Please note that damages caused by manual modifications on the device or unauthorized operation by
unqualified persons are not subject to warranty.
CAUTION: Turn the amplifier on last and off first!
Keep away children and amateurs!
HEALTH HAZARD!
By operating an amplifying system, you can produce excessive sound pressure levels that may
lead to permanent hearing loss.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
3. OPERATING DETERMINATIONS
The MMP-1 with two player mechanisms and built-in mixer has been specially designed for professional
DJ applications. The unit features many functions that precisely meet the requirements of DJs, e.g. beat
counter, adjustable pitch, cueing, seamless playback of a continuous loop, single title replay, search via
rotary wheel, or storage of Hot Cue/Loop points.
The MMP-1 plays titles in the MP3 format from SD cards or USB storage media with a maximum capacity
of 32 GB. Storage media with a capacity above 32 GB cannot be used. The unit is compatible with SDHC
(high capacity) cards. Only files in the MP3 format are supported.
The crossfader allows for crossfading between both input channels and sending the mixed signal to one
stereo output. Alternatively, the mixing function can be deactivated and the signals of the input channels are
sent to separate stereo outputs.
The MMP-1 is provided with an unlimited anti-shock memory which is able to compensate shocks or
vibrations.
This product is allowed to be operated with a direct current of 6 V, 50/60 Hz and was designed for indoor use
only.
The device must only be operated with the included power unit. The power unit falls under protection-class 2
and the MMP-1 under protection-class 3.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
The ambient temperature must always be between 0° C and +40° C.
The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.