User`s manual

00036045.DOC, Version 1.4
30/41
Stacking
This speaker-system may only be installed on top of another speaker-system if both systems are lashed up
with each other via appropriate clamping belts and protected against flipping over.
Please refer to the instructions under Secondary attachment.
Satellite-systems
A satellite-system is a system where a speaker-system with flange is installed on top of a
subwoofer.
The satellite system must always provide enough stability. The subwoofer's base surface
must always be sufficiently dimensioned in relation to the top speaker in order to prevent
tilting over.
The subwoofer and the top speaker must only be connected via an appropriate distance
tube and flange.
The carrying capacity of the distance-tube must never be exceeded.
A satellite system or a combination of speaker system/speaker stand or speaker
system/stand must only be installed on the ground!
When choosing the installation-spot, please make sure that such an installation has to be
installed in a way that no person can enter the area below the system! Make sure that the
respective area is blocked.
An unintended movement of the load has to be avoided - also in case of fire!
The installation is only allowed on carrying areas. In some cases, an appropriate
substructure, e.g. via an balancing foot, has to be created.
The system must never be moved before the top speaker is uninstalled!
When choosing the installation material, optimum dimensions have to be chosen in order
to secure maximum safety.
Installation on a stand or speaker stand
The speaker-system may only be installed on a stand or speaker stand if the original speaker-system is
equipped with an appropriate flange.
Stands or satellite systems must only be installed on a plane area with a maximum inclination angle of 5°.
Caution: Speaker-systems installed on stands or satellite systems may cause severe injuries when
crashing!