User`s manual

00036045.DOC, Version 1.4

33/41

Please note:

ou must never install one speaker-system under another!

When deinstalling the speaker-system, make sure that you insert the original screws in the threaded holes!

Horizontal suspension:

Please note:

The horizontal installation must always be carried out via three eye-bolts and appropriate chains. The

speaker-system must always be installed absolutely planar (vertical angle 90°, horizontal angle 0°).

Procedure:

Step 1: Unscrew the allen screws with a suitable allen key.

Step 2: Install the eye-bolts in the threaded holes of the speaker-system. The eye-bolts must be

tightened until stop position, hand-tight and without any tools.

Step 3: Install the the screw-on chain link in the first and last chain link and tighten the fixation screw.

Step 4: Install the chain with the screw-on chain link at the installation eyelet of the ring coupler and

tighten the fixation screw.

Step 5: Install the chain with the lower screw-on chain link at the eye-bolt of the speaker-system and

tighten the fixation screw.

Step 6: Install the speaker-system in the trussing.