Operating Manual

15
7. 7. Saving and Loading Pre-set
Parameters
The iMRS one application provides you with the ability to save various users
in advance. You can save all organ clocks with all time and intensity levels for
each applicator in advance and load them as needed.
7.1 Saving
In order to create a new user, tap on the “ Settings” button on the user
interface and then tap “Users”.
Tap the “Name” entry (4) and overwrite the placeholder. Then, tap on Next and
the virtual keyboard will disappear
You can now start making settings for the  rst applicator with the  rst organ
clock setting. To do so, tap the circle next to Timer (3) and set the desired
application duration from 1 to 60 minutes. It can be set in steps of 1 minute.
Afterwards, tap the circle next to Intensity (5) and set the desired intensity of
the magnetic  eld ( ux density). This setting has been divided into the levels:
Sensitive, 10, 25, 50, 100, 150, 200 and 400.
Tap on “Next” (6) to set the next organ clock. If you have set all four organ
clocks (morning, afternoon, evening and night), you will automatically be
taken to the next applicator.
In order to create a new user, tap on the “ Settings” button on the user
2
3
4
5
6
1