Operating Manual

8. Starting an Application

Connect the D/A converter and the desired applicator (see Chapter 5, Installa-

tion) and start the iMRS one application (see Chapter 6, Activation). After the

system has been successfully started, chose the desired application duration.

To do so, tap the circle next to Timer (1) and set the desired application dura-

tion from 1 to 60 minutes. It can be set in steps of 1 minute.

Afterwards, tap the circle next to Intensity (4) and set the desired intensity of

the magnetic eld (ux density). This setting has been divided into the levels:

Sensitive, 10, 25, 50, 100, 150, 200 and 400.

The integrated organ clock will automatically adjust to the time set on your

Omnium1. You can see the organ clock setting on the display in the upper

right corner (3). However, if you want to change it manually, tap on the organ

clock icon (2) and choose the desired organ clock setting (morning, afternoon,

evening or night).

The magnetic eld application can be started by tapping the Start/Stop button

(5).