Operating Manual

22
14. Maintenance & Error Messages
The iMRS one system has been designed to be maintenance free.
Potential Error Messages:
Error Message Explanation
DA Converter not working properly The D/A converter is defective.
Low battery for DA convertor The battery is below the 5% charge state.
Error Coil Open Loop There is a defect or broken wire in the applicator.
Error No Applicator Connected An applicator has not been connected, or not been
connected properly.
Error No DA Converter Connected The D/A converter has not been connected, or not
been connected properly.
Goggle does not connect The OMNIBRAIN system has not been connected, or
not been connected properly (optional!).
Repairs and service should only be performed by the manufacturer or the
respective local oces of Swiss Bionic Solutions (you will nd the addresses at:
www.swissbionic.com) or from your supporting Certied LifeStyle Consultant.
Manufacturer:
Swiss Bionic Solutions Schweiz GmbH
Schulhausstrasse 17
8834 Schindellegi
Switzerland
Phone: [phone]
Fax: [phone]
E-Mail: [e-mail]